| Standards | IEEE Std. 802.3™, 802.3u™, 802.3x™ |
| Fiber Optic Connector Specs |
| Multimode | Min TX PWR: -19.0 dBm
Max TX PWR: -14.0 dBm
RX Sensitivity: -30.0 dBm
Max In PWR: -14.0 dBm
Link Budget: 11.00 dB |
| Status LEDs | PWR (Power): ON = Unit has power connected
PWR 1 (Power): ON = primary power connected
PWR 2 (Power): ON = backup power connected
Fault: ON = Power failure or port link failure
LNK/ACT (Ports 1 – 2): ON = Link; Flashing = data transmitting
HDX/FDX (Ports 1 – 2):
ON = Full duplex mode
10/100 (UTP): ON = 100Mbps |
| Dip Switches | 1: Enable / Disable Port Alarms
2: Enable / Disable Link Pass Through
3: Full / Half Duplex 100BASE-FX
4: Converter / Switch Mode |
| Dimensions | Width: 2.1" [54 mm]
Depth: 4.1" [105 mm]
Height: 5.3" [135 mm] |
| Ingress Protection | IP 31 |
| Input Power | 12 to 48 VDC, 0.2A, redundant inputs with reverse polarity protection; Additional barrel connector |
| Power Consumption | 4.6 watts |
| Environment | 0 to +60°C Std. operating temp.
-40 to +75°C Ext. operating temp.
5 – 95% humidity non-condensing
0 – 10,000 feet altitude
-40 to +85°C storage temp. |
| Shipping Weight | 2 lbs. [0.90 kg] |
| Safety Compliance | UL 60950; UL508; CSA C22.2 no. 60950 |
| EMI Compliance | CISPR/EN55022 Class A; FCC Class A; CE Mark; EN61000-4-2; EN61000-4-3; EN61000-4-4; EN61000-4-5; EN61000-4-6 |
| Environmental Compliance | IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration) |
| Warranty | Lifetime |
