STARTECH.COM 10/100 btx pci ethernet card (#ST100S) (retail)

STARTECH.COM 10/100 btx pci ethernet card (#ST100S) (retail)

The StarTech.com Advantage:

• Compatible with PC and Mac systems
• Easy plug and play installation and built-in drivers for Windows (and most other) systems for quick setup
• Full duplex design doubles data transfer rate to 20 Mbits/sec and 200 Mbits/sec!
• Startech.com Lifetime warranty and Free Lifetime technical support

• Auto-negotiation senses speed and duplex capabilities of connected devices
• Auto-setups IRQ and I/O address.
• Built-in FIFO buffers to eliminate external memory.
• Complies with industry standards: IEEE 802.3 CSMA/CD, 100BaseTX and 10BaseT standard.
• One STP connector for 100Mbps or 10Mbps network speed.
• Provides diagnostic software and two LEDs to indicate network link/activity and 10/100Mbps selection.
• Supports 32-bit PCI Bus Master for high performance and low processor utilization.
• Supports early interrupt on transmit to increase performance.
• Supports enhanced smart remote Boot ROM (optional) (BOOTPROM100S)
• Supports ODI driver for NetWare 3.x/4.x, NDIS driver for LAN Manager, Windows 95, Windows 98, Windows NT, Packet Driver for TCP/IP software, and MAC OS X 10.3.

• Bus Type: PCI
• Connector Types: 1 - RJ45 Female
• Full Duplex Support: Yes
• LED Indicators: 1 - 10/100Mbps selection
• LED Indicators: 1 - Network link/activity
• Maximum Data Transfer Rate: [200 Mbits/Sec]
• Number of Ports: 1
• Operating Temperature: 0 ~ 55
• Shipping (Package) Weight: 0.33 lb [0.15 kg]
• Connectors: (1) RJ-45
• Standards: IEEE 802.3/802.3u
• IRQ: Assigned by system
• I/O Address: Assigned by system
• Drivers: ODI driver for NetWare 3.x/4.x, NDIS driver for LAN Manager, Windows 95/98NT/2000/XP; Packet Driver for TCP/IP software, and MAC OS X 10.3
• Temperature: 0 to 55 degrees C
• Humidity: 10 to 90% non-condensing
• Dimensions: 120 x 32 mm
• Weight: 56 g